Built for vapers who need a kit that performs under pressure, literally, the Vaporesso Armour Ultra Vape Kit combines a 5500mAh built-in battery and 100W AXON chipset with quad-rated protection covering IP68 waterproofing, IP69K jet resistance, MIL-STD-810H military-grade shockproofing, and full dustproofing. It ships with the iTank T sub-ohm tank and two GTi Dual Mesh coils, a 0.2Ω pre-installed and a 0.4Ω as a spare, giving you a complete DTL setup out of the box. If you're looking for a vape kit that can take a beating without compromising on battery life or output performance, the Armour Ultra is in a category of its own at this price point. In stock in the UK and ready to dispatch.
Below we break down the key features, coil compatibility, and real-world performance of the Vaporesso Armour Ultra vape kit to help you decide if it's the right kit for you.
What Makes the Vaporesso Armour Ultra Different?
The Armour Ultra sits at an unusual intersection in the Vaporesso vape kit range, it is simultaneously one of the most durable and one of the longest-lasting kits the brand has produced. The quad-rated protection certification is genuinely rare at this price point. Most rugged vape kits carry a single IP rating as a marketing point. The Armour Ultra carries four independently certified ratings, each covering a different threat: dust ingress, water submersion, high-pressure jet exposure, and drop impact across 26 angles from 1.2 metres. That combination reflects a kit built for real outdoor and working conditions rather than a cosmetic toughness claim.
The 5500mAh battery is the other headline differentiator. At moderate sub-ohm wattage, most vapers will get two solid days from a charge. At lower wattage on the 0.4Ω coil, three days is achievable for lighter users. Fast USB-C charging at 9V/2A gets the battery from flat to full in under an hour, and the AXON chipset with Boost, Pulse, Eco, and Smart modes gives you meaningful control over how the battery is used. Despite the battery size and protection ratings, the full kit weighs 256g and is 25% smaller than the Armour S.
5500mAh Battery
The 5500mAh built-in battery delivers up to two to three days of use depending on wattage and coil resistance. Fast USB-C charging at 9V/2A gets the battery from flat to full in under an hour, removing the need to carry a charger for most daily use scenarios.
Quad-Rated Protection
IP68 waterproofing, IP69K jet resistance, MIL-STD-810H military-grade shockproofing, and full dustproofing in a single kit. Every seal on the Armour Ultra has been reinforced, and the USB-C port includes a waterproof cover. This level of certified protection is rare at any price point in the vape market.
AXON Chipset with Boost Mode
The AXON chipset supports Smart, Boost, Pulse, Eco, and TC modes. Boost Mode delivers 40% more stable power than Eco and 25% more than Pulse, keeping vapour production consistent on the GTi Dual Mesh coils. Smart mode reads the fitted coil and sets wattage automatically.
How Does the Vaporesso Armour Ultra Compare to the Armour S?
The Armour Ultra builds on the Armour S with a larger battery, upgraded protection ratings, and a more refined chipset. The 5500mAh cell is a substantial increase over the Armour S, and the AXON chipset with Boost Mode delivers more stable power delivery than the previous generation. The quad-rated protection on the Armour Ultra extends the durability credentials of the Armour S further, with IP69K jet resistance and MIL-STD-810H military-grade shockproofing added alongside the core IP68 waterproofing.
Despite the increased battery and protection spec, the Armour Ultra is 25% smaller than the Armour S at 256g for the full kit. The iTank T with its top airflow and slide-to-fill design is also a step forward from the previous tank in terms of day-to-day usability. For vapers upgrading from the Armour S, the larger battery, improved chipset, and expanded protection ratings make the Armour Ultra a meaningful step up rather than an incremental refresh.
AXON Chipset, Modes, and Power Delivery
The AXON chipset in the Armour Ultra handles both performance and battery management across five modes. Smart mode reads the fitted coil resistance and adjusts wattage automatically, removing the need to configure output manually when swapping between the included coil options. Boost Mode pushes the most stable power delivery of the five modes, 40% more consistent than Eco and 25% more than Pulse, which translates directly to more even vapour production and flavour consistency on the GTi Dual Mesh coils at higher wattage.
Pulse Mode maintains steady wattage output as the battery discharges, which keeps performance consistent through a long session. Eco Mode dials back the output to extend battery life further, useful when you want to stretch the 5500mAh cell toward the three-day end of its range. Temperature Control mode is also available for vapers running TC-compatible coils. The full output range runs from 5W to 100W, covering everything from a relaxed mid-wattage draw through to full sub-ohm performance on the 0.2Ω coil.
Quad-Rated Protection, What Each Rating Means
The Armour Ultra carries four independently certified protection ratings, each covering a distinct category of damage. IP68 certifies the kit as dust-tight and capable of surviving submersion in one metre of water for up to 30 minutes. IP69K adds high-pressure jet resistance, covering exposure to water jets at up to 80°C, the standard used in industrial washdown environments. MIL-STD-810H is the US military standard for drop and shock resistance, with the Armour Ultra tested from 1.2 metres across 26 angles. Full dustproofing seals the buttons, ports, and internals against particulate ingress.
The USB-C port includes a dedicated waterproof cover, and a protective sleeve is included in the box for the iTank T tank glass. These are not cosmetic additions, every seal on the kit has been reinforced to meet the certification requirements rather than simply carrying the rating as a marketing claim.
iTank T and GTi Coil Compatibility
The Armour Ultra ships with the iTank T, Vaporesso's top airflow sub-ohm tank. Top airflow positioning places the air intake above the liquid level in the tank, which reduces the risk of leaking compared to bottom airflow designs, a practical advantage in a kit built for outdoor and active use. The slide-to-fill cap on top makes refilling quick without removing the tank from the mod. UK stock is supplied with a 2ml TPD-compliant tank capacity.
Two GTi Dual Mesh coils are included in the box. The 0.2Ω coil comes pre-installed and runs best at 60 to 75W for maximum vapour production. The 0.4Ω spare runs at 50 to 60W for a slightly cooler DTL draw. Both coils use dual mesh construction for more even heating and consistent flavour across each coil's lifespan. The full Vaporesso coils range includes all available GTi replacement options. Not sure which draw style suits you? Our guide to MTL vs DTL vs RDL vaping covers the key differences clearly.
GTi Coil Compatibility and Options
The Vaporesso Armour Ultra is compatible with the full GTi coil range. Two GTi Dual Mesh coils are included in the box and the wider range is available through our Vaporesso coils collection. Use our coil finder tool to match the right coil to your setup, or use this quick guide:
- Maximum vapour production at higher wattage? The included 0.2Ω GTi Dual Mesh at 60 to 75W is the best starting point.
- Slightly cooler DTL draw at mid-range wattage? The included 0.4Ω GTi Dual Mesh at 50 to 60W gives a more flavour-forward result with less battery draw.
For all GTi coil options, use high-VG freebase e-liquids at 70VG or above and 6mg nicotine strength or below. Nicotine salt e-liquids are not suitable for sub-ohm DTL vaping at these wattages. Browse the full Vaporesso coils range for all compatible GTi replacement options.
Real-World Performance and Long-Term Use
The Armour Ultra delivers on both of its headline claims in daily use. The quad-rated protection holds up under the kind of conditions that would end most vape kits, outdoor work, wet weather, drops onto hard surfaces, without affecting performance or requiring any special handling. The sealed USB-C port and reinforced seals are practical rather than decorative, and the included tank protector sleeve adds a further layer of protection for the iTank T glass in active use.
Battery performance is the other standout. At 60 to 75W on the 0.2Ω coil, two full days of moderate use is a realistic expectation for most vapers. Dropping to the 0.4Ω coil at 50W in Eco or Pulse mode pushes that toward three days for lighter users. The AXON chipset maintains consistent output across the battery discharge cycle, so flavour and vapour production hold steady rather than softening as the day goes on. Fast USB-C charging at 9V/2A means even running the battery down fully is not a major inconvenience. As with any sub-ohm kit, sweetened e-liquids will reduce coil lifespan, a less sweetened high-VG liquid extends coil life noticeably further.
Vaporesso Armour Ultra Vape Kit Specifications
| Battery |
5500mAh built-in |
| Output |
5–100W adjustable |
| Chipset |
AXON with Boost Mode |
| Modes |
Smart, Boost, Pulse, Eco, TC |
| Charging |
USB-C 9V/2A or 5V/3A (under 1 hour) |
| Tank |
iTank T, top airflow, slide-to-fill |
| Tank Capacity |
2ml TPD-compliant |
| Included Coils |
GTi Dual Mesh 0.2Ω, GTi Dual Mesh 0.4Ω |
| Protection |
IP68, IP69K, MIL-STD-810H, dustproof |
| Weight |
173g (mod), 256g (full kit) |
| Dimensions |
144.5 x 37.6 x 31mm |
| Colours |
7 |
How Long Does the Armour Ultra Battery Last?
The 5500mAh battery in the Vaporesso Armour Ultra is the largest built-in cell available in any Vaporesso kit and among the largest in the sub-ohm mod category overall. At 60 to 75W on the 0.2Ω coil, most vapers will get two solid days of moderate use from a single charge. Running the 0.4Ω coil at 50W in Eco or Pulse mode, lighter users can push toward three days. Heavy chain vapers at higher wattage will still get a full day without needing to reach for a charger. When a top-up is needed, fast USB-C charging at 9V/2A gets the 5500mAh cell from flat to full in under an hour. For more on what to expect from Vaporesso devices over time, our guide to the best Vaporesso vape kits covers the range in detail.
Getting the Best From Your Armour Ultra
When fitting a new GTi coil, prime it with a few drops of e-liquid directly onto the cotton before filling the tank, then leave it to saturate for five to ten minutes before your first draw. Start at the lower end of the recommended wattage range for whichever coil you are using and work upward gradually to find the output that suits your preference.
For maximum battery life, use Eco or Pulse mode with the 0.4Ω coil at 50W. For maximum vapour production, use Boost mode with the 0.2Ω coil at 70 to 75W. Use high-VG freebase e-liquids at 70VG or above and 6mg or below for both coil options, nicotine salt e-liquids are not suitable for sub-ohm DTL vaping at these wattages. Sweetened e-liquids will reduce coil lifespan regardless of which coil you are using. Browse our full range of e-liquids for high-VG shortfill options suited to the Armour Ultra.
Who Is the Vaporesso Armour Ultra Built For?
The Vaporesso Armour Ultra is built for two groups: experienced sub-ohm vapers who work or spend time outdoors and need a kit that survives genuine daily punishment, and DTL vapers who want the longest possible battery life from a single charge without carrying a charger or spare batteries. The quad-rated protection makes it the most durable certified vape kit at this price point, and the 5500mAh battery makes it the longest-lasting built-in battery sub-ohm kit in the Vaporesso range. Those two qualities together are difficult to find in a single device anywhere in the market. For an in-depth breakdown of the Armour Ultra, read our Vaporesso Armour Ultra Vape Kit Review.
It is not the right choice for MTL vapers, beginners, or anyone looking for a compact, pocketable device. The Armour Ultra is a full-size sub-ohm mod and requires a working knowledge of DTL vaping, high-VG e-liquids, and wattage adjustment to get the best from it. For vapers who want nicotine salt e-liquids or a tighter MTL draw, the Vaporesso pod kit range is a better fit. For a broader look at what Vaporesso offers across the full range, our guide to the best Vaporesso vape kits is a useful starting point.
Browse the complete vape kits collection if you'd like to compare options across brands before deciding.
All products on WizVape are held in UK stock and comply fully with UK TRPR/TPD regulations. If you are unsure what that means for the products you are buying, our guide covers it clearly.
E-Liquid Compatibility
The Vaporesso Armour Ultra Vape Kit is best started with a 50/50 VG/PG e-liquid, moving to 60/40 or higher VG if the kit supports more open or higher-wattage vaping. It is compatible with both nicotine salt and freebase e-liquids, supporting coil resistances spanning from 0.2Ω to 0.5Ω across a 5-100W output range. Nicotine salts generally suit tighter, lower-wattage MTL coils, while freebase e-liquids work better with more open, higher-wattage options.
Browse Elux Legend nic salts for a well-matched nic salt pairing, also available as part of our 5 nic salts for £11 multi-buy deal.
Available Colours
The Vaporesso Armour Ultra Vape Kit is available in the following 7 colours:
What's In The Box?
- 1x Vaporesso Armour Ultra Mod
- 1x Vaporesso iTank T
- 1x Vaporesso GTi Dual Mesh Coil 0.2Ω
- 1x Vaporesso GTi Dual Mesh Coil 0.4Ω
- 1x Extra Glass Tube
- 1x Spare Parts
- 1x USB-C Charging Cable
- 1x Warranty Card
