The Voopoo Drag 5 Vape Kit is a dual 18650 sub-ohm mod kit built for high-power direct-to-lung (DTL) vaping with high-VG e-liquids. It delivers up to 177W output and pairs the GENE TT 2.0 chipset with the UFORCE-X top-airflow tank for strong vapour production and clear flavour at higher wattages.
Quick positioning: This is a dual-battery, high-power kit aimed at DTL and restricted DTL vaping with sub-ohm coils. It is not a typical beginner MTL starter kit. If you want maximum power headroom, long runtime and full control, the Drag 5 is built for that job.
As part of the latest generation in the Drag series, the Drag 5 focuses on practical upgrades such as a C-frame battery design, a 3-in-1 function switch, a battery evaluation feature, and multi-mode control to suit different coil resistances and wattage preferences.
Dual 18650 Battery Configuration
The Drag 5 runs on two external 18650 batteries (sold separately). A dual battery setup improves runtime and helps maintain stable output when vaping at higher wattages compared to single-cell devices.
Battery Safety Note
For best results, use two matched 18650 batteries of the same brand and age, charge them together, and always carry spare cells in a proper battery case. Replace batteries if wraps are damaged.
Battery Evaluation Feature
The Drag 5 includes a battery evaluation function that checks whether the installed batteries are suitable before firing. This adds an extra layer of practical safety and helps support balanced power delivery across both cells.
Built-In Safety Protections
The Drag 5 includes multiple automatic protections to support safer daily use:
- Overtime protection
- Short circuit protection
- Overcharge protection
- Over-discharge protection
- Overcurrent protection
- Overtemperature protection
USB-C Fast Charging (5V/3A)
The Drag 5 supports USB-C fast charging up to 5V/3A to reduce downtime between charges. For best battery health, many users still rotate and charge pairs externally, but onboard charging is useful for day-to-day top-ups.
C-Frame Battery Design
The C-frame structure provides a clean battery compartment layout without relying on a traditional hinged door. It improves durability and makes battery fitting straightforward while keeping the batteries secure during daily use.
Up To 177W Adjustable Output
Power output is adjustable from 5W to 177W. Use lower wattage settings with higher resistance coils for a more restricted inhale, or increase power for sub-ohm DTL vaping with lower resistance coils and open airflow.
GENE TT 2.0 Chipset & Power Modes
The Drag 5 uses the GENE TT 2.0 chipset for fast firing response and consistent performance. It supports four power modes so you can tailor the vape to your coil and style:
-
Smart Mode – Detects coil resistance and sets a sensible power range.
-
RBA Mode – Full manual wattage control.
-
Eco Mode – Improves battery efficiency for longer runtime.
-
Turbo Mode – Quicker ramp-up feel for a stronger initial hit.
0.96-Inch TFT Display & User Interface
The Drag 5 uses a clear 0.96-inch TFT colour display to show key vaping data such as wattage, coil resistance, battery levels and puff count. The screen makes it easier to match power to the installed coil and monitor both batteries during use.
3-In-1 Function Switch
The side function switch can be set to lock the device, lock wattage adjustments, or fully unlock. This helps prevent accidental firing or unwanted wattage changes when carrying the kit.
Drag 5 vs Drag 4 – What’s Different?
The Drag 5 and Drag 4 are both dual 18650 Voopoo mods aimed at sub-ohm vaping. The Drag 5 adds usability and control upgrades such as the GENE TT 2.0 chipset, C-frame battery design, 3-in-1 function switch, and the battery evaluation feature.
Kit bundles can vary by retailer. The Drag 5 kit is commonly supplied with the UFORCE-X tank and PnP X coil compatibility, while Drag 4 kits may be supplied with different tank and coil bundles depending on the version.
UFORCE-X Tank – Top Airflow, Leak Control & Slide Top Fill
The included UFORCE-X tank uses a top airflow design, which helps reduce leaking compared with bottom-airflow tanks because airflow entry points are positioned higher up the tank. Airflow is adjustable to tune the draw from more restricted to more open DTL.
Refilling is handled via a slide-top fill mechanism, making top-ups quick without removing the tank from the mod. The tank is supplied in a 2ml TPD-compliant format and includes spare glass.
PnP X Coil Compatibility
The Drag 5 is compatible with Voopoo PnP X coils, which cover a wide range of resistances for sub-ohm DTL and restricted DTL setups. Always keep wattage within the range printed on the coil.
| Coil |
Recommended Wattage |
Style |
| 0.15Ω |
60–80W |
DTL |
| 0.2Ω |
40–60W |
DTL |
| 0.3Ω |
32–40W |
Restricted DTL |
| 0.45Ω |
25–32W |
Restricted DTL |
| 0.6Ω |
18–23W |
Restricted DTL |
| 0.8Ω / 1.0Ω |
12–18W |
Restricted / MTL (tighter setup) |
DTL, RDL or MTL – Which Style Suits the Drag 5?
The Drag 5 is primarily designed for sub-ohm DTL vaping with high-VG e-liquids. It can also be set up for restricted DTL using mid-range coil resistances and tighter airflow. A tighter, more MTL-style draw is only realistic with higher resistance coils at lower wattages and more closed airflow.
Sub-Ohm Performance & High-VG Compatibility
The Drag 5 is designed for sub-ohm vaping with high-VG e-liquids. For best results with lower resistance coils, use high-VG shortfills (70% VG or higher). Explore compatible 70/30 shortfills or larger 100ml shortfill e-liquids for extended high-wattage use.
For higher resistance coils and lower wattage use, 50/50 blends may be suitable. If you want a smoother, lower power setup, browse 50/50 e-liquids.
Pros & Considerations
-
Pros: Up to 177W output, dual 18650 runtime, fast firing response, multiple power modes, top airflow tank to help reduce leaking, slide-top filling, wide PnP X coil range.
-
Considerations: Batteries are not included, the kit is larger than single-cell devices, and high-power sub-ohm vaping uses more e-liquid.
Why Choose the Voopoo Drag 5
The Drag 5 is a strong choice if you want a reliable dual battery sub-ohm kit with modern control features and day-to-day usability upgrades. The GENE TT 2.0 chipset gives you Smart mode for easy setup, RBA mode for full manual control, Eco mode for longer battery life, and Turbo mode for a faster ramp-up feel.
Pair that with the UFORCE-X top-airflow tank, slide-top filling, and the 3-in-1 function switch, and you get a kit that is built for high-VG DTL vaping while staying practical to use and carry.
How To Set Up the Drag 5
- Insert two matched 18650 batteries (not included).
- Fit your chosen PnP X coil into the tank.
- Fill via the slide-top fill port and close it firmly.
- Leave the tank standing for several minutes so the coil fully saturates.
- Start at the low end of the coil’s wattage range, then increase gradually.
Coil Lifespan & Avoiding a Burnt Taste
Coil lifespan varies by wattage and e-liquid sweetness, but many sub-ohm users replace coils every 1 to 2 weeks. Always allow the coil to fully saturate before first use, start at the lower end of the recommended wattage range, and increase gradually to help prevent early burning.
Specifications
| Output Power |
5–177W |
| Battery |
Dual 18650 (Not Included) |
| Chipset |
GENE TT 2.0 |
| Tank |
UFORCE-X |
| Capacity |
2ml (TPD Compliant) |
| Charging |
USB-C 5V/3A |
| Airflow |
Top Adjustable |
| Connection |
510 Thread |
If you are exploring the Drag range, browse our full selection of Voopoo vape kits to compare battery configurations and power options, keep your setup running with genuine Voopoo coils, or discover similar high-performance devices in our sub-ohm vape kits collection.
E-Liquid Compatibility
A 50/50 VG/PG ratio suits the MTL coil on the Voopoo Drag 5 Vape Kit – Dual 18650 Sub-Ohm Kit, while 70/30 high-VG blends are better matched to the DTL setting. It covers both mouth-to-lung and direct-to-lung vaping, with coil resistances spanning from 0.15Ω to 0.3Ω across a 5-177W output range.
On the MTL coil setting, nicotine salts at higher strengths are the natural fit. Switch to freebase e-liquids at 3mg or lower when running the DTL coil, higher nicotine concentrations become uncomfortably harsh at those wattages.
Pods hold 2ml of e-liquid and refill via a top fill mechanism, keeping things convenient whether you're switching between styles.
High-VG liquids such as 70/30 blends are generally not recommended on the MTL coil setting, thicker e-liquid can struggle to wick efficiently in compact pod coils at lower wattages and may lead to dry hits.
For the MTL coil options, Bar Juice 5000 nic salts pairs well at higher nicotine strengths, grab a selection with our 10 nic salts for £16 deal if you want to try a few flavours at once.
Available Colours
The Voopoo Drag 5 Vape Kit – Dual 18650 Sub-Ohm Kit is available in the following 7 colours:
What's In The Box?
- 1x VooPoo Drag 5 Mod
- 1x UForce-X Tank (2ml)
- 1x PnP X 0.15Ω Mesh Coil
- 1x PnP X 0.3Ω Mesh Coil
- 1x USB-C Charging Cable
- 1x User Manual
