Vaporesso VAST Pod Kit

Vaporesso VAST Pod Kit

Vaporesso VAST Pod Kit is a refillable MTL vape kit that has been designed to give individuals more time between refills without having to upgrade to an advanced high-powered device. It uses a 2 ml pod and an 8ml refill container, providing 10ml of e-liquid in the entire system, with the main pod portion aligned to the UK market.

Another direction that Vaporesso has taken is the coil. As an alternative to selecting a few distinct cartridges, the VAST Tri-Core Mesh pod is a cartridge with 0.4 ohm, 0.6 ohm, and 0.8 ohm mesh resistances in a single cartridge. ECO, NOR, and PWR modes allow you to adjust the character of the vape from a smoother MTL draw to more intense flavour and vapour output.

The Vaporesso VAST Vape Kit is flexible enough to allow daily vaping: A 1600mAh rechargeable battery, adjustable side airflow and up to 30W output, and a 1-second priming system reduce the time spent waiting once a fresh cartridge is loaded. Vaporesso has also incorporated SSS 3.0 no-leak technology to ensure that condensation is controlled and that the pod is kept cleaner during normal use. 

Key Features of Vaporesso Vast  

• 2ml pod with 8ml refill container

• 10ml e-liquid capacity

• 1-second priming technology

• Tri-Core Mesh pod system

• 0.4Ω, 0.6Ω and 0.8Ω resistance in one pod

• ECO, NOR and PWR modes

• Up to 30W output

• 1600mAh built-in battery

• USB Type-C 5V/2A charging

• Adjustable side airflow

• MTL vaping

• SSS 3.0 leak-resistant technology

• Improved condensation management

• Up to six refills per pod cartridge

• Mesh system tested by Vaporesso for extended use

• Three-colour battery level indicator

• Nine colour options 

10ml Refill System and 1-Second Priming

The VAST has a two-part refill design that consists of a 2ml vaping chamber and an 8ml refill tank. They contain 10ml of e-liquid, and the combination reduces the frequency of having to stop and refill compared to a conventional 2ml pod that comes as a single unit.

Another practical change is its quick-priming design. According to Vaporesso, the VAST can prime within approximately one second of a properly prepared pod, and hence there is much less waiting time prior to the first draw.

Tri-Core Mesh and Three Power Modes

Rather than having to purchase multiple pod resistances, the VAST Tri-Core Mesh cartridge puts 0.4Ω, 0.6Ω and 0.8Ω mesh elements in the same pod system.

Three modes are selected to be coupled with the device. You can vape with a smoother, lighter vapor with the 0.8Ω set-up, a more balanced vape with the 0.6O one, and a warmer vape and stronger flavour delivery with the 0.4O set-up in the ECO Mode.

It makes the Vaporesso VAST vape kit simpler to tune without needing to bring a variety of pods. 

SSS 3.0 Leak Resistance and Long Pod Life

SSS 3.0 Leak Resistance Technology by Vaporesso concentrates on the spots where refillable pods are known to be messy. The cartridge incorporates a better cotton buffer, increased wicking holes, and condensation space.

The purpose is to minimize leakage and condensation around the cartridge and to keep the e-liquid flowing towards the coil.

The VAST pod is rated by Vaporesso for as many as six refills; i.e., you should not be required to change the entire cartridge after every fill-up. The actual pod life would remain dependent on the e-liquid that you use, frequency of vaping, and the intensity of coil use. 

1600mAh Battery and Adjustable Airflow

The Vaporesso VAST has a battery capacity of 1600mAh providing it with enough charge to carry a person through their day of daily vaping, and the USB Type-C 5V/2A is charged by USB Type-C to recharge on the go when limited battery capacity is reached.

An indicator of a colour gives you a snap on the amount of charge left:

• Red: 0-30%

• Blue: 30-60%

• Green: 60-100%

A side slider is used to control the airflow. Cover it with your lips to make it draw the MTL tighter, or leave it open so that you can have a more airy inhale.

And in conjunction with the three modes to control the power, the airflow control provides you with further control over the sensation of the VAST and makes it not too complicated.

Compatible E-Liquid

The Vaporesso VAST Pod Kit is most effective with pod-friendly e-liquids which can wick well through its Tri-Core Mesh cartridge.

When vaping daily with MTL, a 50/50 VG/PG vape liquid and nicotine salts are good options to start with, especially with the smoother 0.8Ω ECO setting mode.

Balanced 50/50 liquids on 0.6Ω NOR mode also provide a good amount of warmth and vapour.

With the 0.4Ω PWR mode, it is reasonable to use a weaker freebase e-liquid since the pod generates more vapour at a time. Vaporesso suggests using a freebase liquid that is less than 70% VG in this installation.

Compatible Pods

VAST has been crafted based on the Vaporesso VAST Tri-Core Mesh Pod and Refill Containers system.

The cartridge is a combination of three resistances:

• 0.8Ω for ECO Mode

• 0.6Ω for NOR Mode

• 0.4Ω for PWR Mode

To be used in the UK, the system is paired with a 2ml pod and 8ml refill.

This is not a standard XROS, LUXE, or other Vaporesso cartridge, so replacement pods should be specifically labelled for the Vaporesso VAST range. 

How to Use the Vaporesso VAST Pod Kit

• Take the VAST device, pod, and the refill container out of the packaging.

• Hold the cartridge at an angle and add your chosen e-liquid.

• Fill at least to the minimum fill line shown inside the cartridge.

• Peel off the red silicone ring at the bottom.

• Hold the bottom with both hands and press the bottom firmly inside the main pod body until the bottom is connected.

• Insert the assembled cartridge into the VAST device.

• Let the pod be prepared by the quick-priming system.

• Choose ECO, NOR, or PWR mode depending on the vaping experience you want.

• Adjust the airflow slider on the side to your desired MTL draw.

• Vape as normal.

• Use USB-C to recharge the device when the battery indicator is low.

• Fill up the cartridge when necessary, and change it when the flavour or vapour performance significantly wanes. 

Vaporesso VAST Specifications

Why Choose the Vaporesso VAST Pod Kit?

The VAST would be the most reasonable to a person who is a fan of refillable MTL vaping, but is fed up with having to fill a small 2ml pod over and over again.

It has a 2ml + 8ml refill system that effectively provides you with a significantly higher amount of e-liquid in the entire setup, and the Tri-Core Mesh pod eliminates the act of having to select and change out multiple distinct resistance cartridges.

Being able to operate the device in three power modes, it can also provide it with a little more range as compared to a simple fixed output pod kit. ECO has to offer you an easier vape and less power consumption, nor allows you to have the middle ground between the two, and PWR offers a warmer, firmer pull.

Combine the huge 1600mAh capacity battery, adjustable airflow, rapid priming, and SSS 3.0 leak-proofing, and the VAST is designed to eliminate those small disruptions that tend to accompany refillable pod vaping.

Vaporesso Vast Vape Kit Price

The Vaporesso VAST Pod Kit can be purchased from Wiz Vape for just £14.99 and comes with its built-in 1600mAh battery, Tri-Core Mesh cartridge, and the 10ml combined refill system. Select your favorite compatible E-liquid and select between ECO and NOR and PWR modes to find the MTL vape of your choice. 

What's In The Box?

• 1 x Vaporesso VAST 1600mAh Battery Device
• 1 x VAST Tri-Core Mesh 2ml Pod
• 1 x VAST 8ml Refill Container
• 1 x USB Type-C Cable
• 1 x User Manual
• 1 x User Suggestion Card