The twist-to-switch mouthpiece and dual power modes of the Pyne Pod Click S 30K Prefilled Pod Kit give you two flavours in one device, switchable with a quarter turn of the mouthpiece. This vape kit delivers up to 30,000 puffs in Regular Mode and a smooth mouth-to-lung draw at 20mg nic salt, with two 1ml prefilled pods and two 8ml auto-refill containers across 15 dual-flavour editions. Browse the full Pyne Pod range or compare options across our prefilled pod kits selection. In stock in the UK and ready to dispatch.
Below we break down the key features, flavour range, and real-world performance of the Pyne Pod Click S 30K Prefilled Pod Kit to help you decide if it's the right vape for you.
What Makes the Pyne Pod Click S 30K Prefilled Pod Kit Different?
The Pyne Pod Click S 30K holds two flavour sets simultaneously. Each pod is prefilled with a different flavour, and two 8ml containers feed e-liquid into them independently. Rotating the mouthpiece a quarter turn switches between flavours without removing or swapping anything, which makes it possible to move between, say, a fruit option and a menthol throughout the day without interrupting your session or handling the pods. The "S" in the name stands for this switch function, and it is what separates this kit from other dual-flavour pod kits that require a physical pod swap.
Regular mode runs at 10W for efficient all-day use, while Boost mode at 20W increases vapour warmth and volume for a fuller draw. A double-click on the front button switches between the two modes, and the LED display confirms the active setting, showing R for Regular or B for Boost. The magnetic pod connection makes replacing a spent setup quick and clean when the 18ml of e-liquid runs out. Browse Pyne Pod vapes at WizVape to see how this kit sits within the broader range.
Twist-to-Switch Mouthpiece
Both pods stay loaded in the device at all times. A quarter turn of the mouthpiece switches you between flavour one and flavour two without removing anything. It is the quickest and cleanest way to alternate between two tastes in a single prefilled pod kit, with no fiddling between sessions.
900mAh Fast-Charge Battery
The 900mAh battery supports a full day of MTL vaping on a single charge, with USB-C charging bringing it back from empty in under 30 minutes. A USB-C cable is not included in the box. The LED display shows remaining battery level alongside puff count and the active power mode.
30,000 Puffs Per Kit
Two 1ml pods and two 8ml containers combine for 18ml of 20mg nic salt e-liquid per setup, supporting up to 30,000 puffs in Regular Mode. The kit is also cross-compatible with Pyne Pod Click 10K, 30K, and 50K replacement pods, widening the available flavour options beyond the 15 editions included at launch.
Mesh Coil Performance and MTL Draw
Every pod in the Pyne Pod Click S 30K has a mesh coil built in, so there is no priming, no coil swapping, and no maintenance between pod sets. Mesh coils heat e-liquid across a larger surface area than a conventional wire coil, producing more even vapourisation and consistent flavour from the first puff to the last. Both loaded pods use the same mesh coil construction, so the flavour quality stays consistent regardless of which position the mouthpiece is turned to.
In Regular mode at 10W, the mesh coil delivers a smooth, cool mouth-to-lung draw that holds up across the full 18ml of e-liquid per setup. Boost mode at 20W produces a warmer, fuller draw with noticeably more vapour without any change to the pod or coil. The 20mg nic salt formula pairs well with both wattage settings, giving a fast, smooth nicotine hit on each inhale without the harshness that freebase nicotine would produce at equivalent strength.
Nicotine Strengths and Variants
The Pyne Pod Click S 30K Prefilled Pod Kit uses a single nicotine strength of 20mg/ml, delivered as nicotine salt e-liquid across all 15 dual-flavour editions. Nicotine salts absorb more quickly than freebase nicotine and provide a smoother throat hit at higher concentrations, making 20mg a comfortable strength for the tight mouth-to-lung draw this kit is designed for. The 20mg concentration suits most vapers switching from cigarettes and works well at both Regular and Boost wattage settings. Browse our full selection of nicotine salts if you want to explore nic salt e-liquids for a refillable device alongside this kit.
- 20mg/ml: The standard concentration for prefilled MTL pod kits, suited to regular smokers switching to vaping and to vapers who want a fast, satisfying nicotine hit with a smooth inhale. Works at both 10W Regular and 20W Boost modes without harshness.
The kit comes in 15 dual-flavour editions, each pairing two Pyne Pod nic salt flavours in a single setup. Replacement Pyne Pod Click refill packs are available separately and are cross-compatible with Pyne Pod Click 10K, 30K, and 50K devices. Browse prefilled vape pods at WizVape for the full replacement range.
Real-World Performance and Long-Term Use
Under moderate use in Regular Mode, the Pyne Pod Click S 30K delivers consistent flavour and draw resistance from the first puff through to the end of the 18ml setup. The mesh coils in both pods maintain flavour quality throughout, and the fixed MTL airflow keeps the draw tight and steady rather than softening as e-liquid levels drop. The 30,000 puff count is a manufacturer figure based on Regular Mode at average draw lengths, and real-world totals typically run lower, particularly in Boost mode where e-liquid consumption is higher.
The kit is compact and pocket-friendly despite holding two full pod-and-container sets. The magnetic pod connection makes replacing a spent setup straightforward, and the LED display takes the guesswork out of monitoring battery level, puff count, and active mode throughout the day. Once the included pods and containers are empty, replacement Pyne Pod Click refill packs are available separately and compatible with this device. Dispose of empty pods at a local vape recycling point rather than in general waste.
Pyne Pod Click S 30K Prefilled Pod Kit Specifications
| Puff Count |
Up to 30,000 (Regular Mode) |
| Battery |
900mAh |
| Charging |
USB-C, under 30 minutes (cable not included) |
| Power Modes |
Regular (10W) / Boost (20W) |
| Nicotine Strength |
20mg/ml |
| Coil |
Mesh (built into each pod) |
| Activation |
Inhale activated |
| Pod Capacity |
1ml x2 |
| Container Capacity |
8ml x2 |
| Total E-Liquid |
18ml |
| Display |
LED (battery, puff count, power mode) |
| Flavour Switch |
Twist-to-switch mouthpiece |
| Pod Connection |
Magnetic |
| Pod Compatibility |
Pyne Pod Click 10K, 30K, 50K pods |
| Flavour Editions |
15 dual-flavour editions |
How Does the Pyne Pod Click S 30K Compare to the Pyne Pod Click 50K?
The Pyne Pod Click S 30K adds a twist-to-switch mouthpiece that the Pyne Pod Click 50K does not have. On the 50K, switching between flavours requires physically removing and reinserting pods. The 30K keeps both pods loaded at all times, so a turn of the mouthpiece is all it takes to change flavour, which is faster and cleaner for vapers who alternate between tastes frequently throughout the day.
The 30K also carries a 900mAh battery, which is larger than the Pyne Pod Click 50K, giving a longer charge cycle despite the lower total puff count per setup. Vapers who prioritise effortless flavour switching and a bigger battery over maximum puffs per kit will find the 30K the more practical daily option. Those who want to stretch a single pod setup as far as possible before replacing it may prefer the higher-capacity 50K instead.
How Long Does the Pyne Pod Click S 30K Prefilled Pod Kit Last?
Under moderate use in Regular Mode, most vapers find the Pyne Pod Click S 30K lasts several days per setup before the combined 18ml of e-liquid across both pod-and-container sets runs out. The manufacturer quotes up to 30,000 puffs per kit in Regular Mode, with real-world totals typically lower, and Boost mode will reduce the puff count further as it draws more e-liquid per puff at 20W. The 900mAh battery keeps this vape kit running for a full day between charges under regular MTL use, with USB-C topping it up in under 30 minutes. A USB-C cable is not included and should be purchased separately if needed.
Who Is the Pyne Pod Click S 30K Prefilled Pod Kit Built For?
This vape kit suits vapers who want variety from a single device without the hassle of carrying multiple pods or swapping them mid-session. The twist-to-switch mouthpiece makes it a strong choice for anyone who regularly alternates between flavour types throughout the day, and the dual power modes add flexibility for those who want a lighter draw in the morning and something fuller later on. At 20mg nic salt and with a tight MTL draw, it is also a natural fit for smokers making the switch for the first time, who will find the mouth-to-lung inhale familiar from the outset. For an in-depth breakdown of the Click S 30K, read our full Pyne Pod Click S 30K Prefilled Pod Kit Review.
Vapers who prefer a single consistent flavour, a wider draw, or a higher puff count per setup may find this pod kit less suited to their needs. The fixed MTL airflow and dual-flavour system add complexity that benefits only those who actually use it. Browse our new prefilled pod kits to compare alternatives, or explore pod kits across the wider catalogue if you want a refillable option instead.
Browse the full prefilled pod kit options at WizVape to find the right device for your needs.
All products on WizVape are held in UK stock and comply fully with UK TRPR/TPD regulations. If you are unsure what that means for the products you are buying, our guide covers it clearly.
New to Prefilled Pod Kits?
Prefilled pod systems are designed from the ground up to be simple, no coils, no refilling, no adjustments, just swap the pod when it runs out and vape.
To get a proper grounding in how these devices work and what separates the better options from the rest, our prefilled vape pods guide covers the fundamentals including puff counts, pod formats, and the main UK brands in detail. For a practical walkthrough of setting up and using your device for the first time, the first-use setup guide is the most direct route. The full prefilled pod kits guide is also worth a read if you want a wider comparison of devices and brands available in the UK.
As a rechargeable prefilled system, the Pyne Pod Click S 30K Prefilled Pod Kit gives you the convenience of a disposable without the cost of throwing away a whole device each time, just swap the pod when it runs out and carry on.
Available Pyne Pod Click S 30K Flavours
The Pyne Pod Click S 30K is available in 15 flavours, including options to suit every taste.
What's In The Box?
- 1x Pyne Pod Click S Battery Device
- 2x Pyne Pod Click S 30K Prefilled Pod (1ml)
- 2x Pyne Pod Click S 30K Refill Tank (8ml)
- 1x User Manual
