Can Any E-liquid Be Used In Any Vape Pen? Is a question that many beginners to the vape users have, and it requires an answer? As the vaping industry has grown in recent years, so has the number of options available to customers of hardware and liquids. However, most beginning users are unaware that almost all liquids don't contain full with all vapes, which may rapidly lead to leaky tanks, blocked coils, and a less-than-satisfactory vaping experience. We'll go over why you can't just put any e-liquid in your vape and how to pick the best options in this post.
Almost all e-liquids include just four ingredients: propylene glycol (PG), vegetable glycerin (VG), nicotine, and flavour. The bulk of this flavour may be found in your baking closet or even your local store! When compared to tobacco cigarettes, which contain over 7000 various chemical compounds each time you inhale, it's apparent which you'd want to use.
PG and VG are the most common basic components in e-liquids, and they can be found in virtually all vape juices on the market today. The ratio of PG to VG in your e liquid base is the most important factor in your entire vaping experience.
The are lots of different types of e-liquids, below is a breakdown on what each type consists of and the most common use for them
Liquids with higher propylene glycol content generate thinner clouds, have a stronger throat impact, and can frequently deliver more powerful tastes.
These liquids are thicker, sweeter, and generate significantly bigger cloud as PG liquids since they have a greater percentage of vegetable glycerin.
A 50/50 liquid contains an equal ratio of VG to PG, resulting in a satisfying throat punch, a medium-sized cloud, and delicious, rich tastes.
Nicotine-free 50/50 or VG liquids in bigger bottles that can be filled up with nicotine shot that may be purchased separately. Shortfill e-liquids are available in a wide range of PG and VG ratios, and because you can pick the nicotine level that's appropriate for you, they're one of the most flexible e-liquids on the market. Short fills are still available in a variety of amazing flavour, including the award-winning Dinner Lady line, which provides customers with a variety of rich and layered dessert flavour from your vape, including:
A self-contained pod holding e-liquid and, in most cases a coil. A PG liquid is usually used to fill them.
That's right. According to the list above, there are approximately 5 varieties of liquid. So, which one should you get for your vape?
Your option is clear if you have a pod vape or a cig-a-like. Its custom fit for you. Simply purchase a suitable pod that has already been pre-filled with the appropriate liquid.
To use a standard vape pen with a regular coil, you'll almost certainly need to use a standard e-liquid. The coils and batteries aren't strong enough to efficiently heat a high VG liquid, which results in a blocked coil and a poor vaping experience. Most vape pens can handle a 50/50 juice, but if you're to use an entry-level device, you might want to avoid it.
A box mod has a stronger battery and a sub-ohm coil, allowing it to easily heat and vaporize VG. Using a high PG liquid might result in overheated juice that is less enjoyable to vape and more prone to leak, therefore aim for a VG content of 50% or higher. Variable temperature adjustments, wattage modes, airflow settings, and power levels are all available on more modern vape devices, allowing you to customize your vaping experience on a regular basis. They allow you to vape both mouth-to-lung and direct-to-lung, which necessitates the use of multiple e-liquids to provide the greatest potential results.
It's not only about the PG and VG content when it comes to selecting the best e-liquid. It's also important to purchase liquids that have been produced in a safe manner using high-quality components. Always search for liquids manufactured in the United Kingdom or the European Union that have undergone stringent quality control procedures. Don't just buy inexpensive liquids from a guy at the market in bottles with handwritten labels. It's not going to end nicely.
If you're a beginner vaper and aren't sure what sort of e-liquid is best for you, or if you're an expert vaper seeking to upgrade, don't hesitate to contact WizVape knowledgeable staff. We can assist you in selecting the appropriate e-liquids, devices, and accessories to ensure that you have a satisfying vaping experience every time.
No, e-liquids must match your device type. MTL vape pens and pods need 50/50 VG/PG liquids with nic salts (10-20mg), while sub-ohm devices require high VG (70/30+) with low nicotine freebase (3-6mg). Using wrong liquid causes dry hits, leaking, harsh throat hit, poor performance, or device damage—always match liquid to device specifications.
High VG (70/30+) in MTL devices causes: dry hits and burnt taste (too thick to wick through small coil ports), premature coil failure, weak flavor, and insufficient vapor. MTL devices designed for thin 50/50 liquids—thick VG cannot saturate coils properly causing frustrating, unsatisfying experience.
50/50 liquid in sub-ohm tanks causes: excessive leaking (too thin for large wicking ports), gurgling sounds, harsh throat hit at high wattage, rapid e-liquid consumption, and potentially flooding coils. Sub-ohm requires thick high VG liquids—thin 50/50 flows too freely through oversized wicking.
Never use high-strength nic salts (20mg) in sub-ohm—causes extreme harshness, potential nicotine poisoning (nausea, dizziness, vomiting), wasted e-liquid, and dangerous overconsumption. Some vapers use low-strength nic salts (3-6mg) in sub-ohm acceptably, but freebase nicotine is optimal for high-power devices.
Yes, but uncomfortable—freebase nicotine at typical pod strengths (10-20mg) is extremely harsh versus smooth nic salts. High-strength freebase causes throat irritation and unpleasant experience. Use nic salts in pod systems for smooth satisfaction; freebase is designed for low-strength sub-ohm use (3-6mg).
Check device specifications: coil resistance above 0.8Ω = 50/50 liquids with nic salts, coil resistance below 0.8Ω = high VG with freebase. Pod systems almost always use 50/50 nic salts. Sub-ohm tanks use 70/30+ freebase. When uncertain, ask retailer or check manufacturer recommendations.
MTL devices need 50/50 VG/PG (or maximum 60/40 VG/PG) for proper performance. This thin consistency wicks perfectly through small MTL coil ports, delivers concentrated flavor, provides appropriate throat hit with nic salts, and prevents dry hits. Most nic salt e-liquids are 50/50 specifically for MTL compatibility.
Sub-ohm requires 70/30 VG/PG minimum, with many using 80/20 or Max VG for best results. High VG provides: smooth throat hit at high power, thick clouds, proper viscosity for large coil wicking, and prevents leaking through oversized ports. Never use 50/50 in sub-ohm devices.
Only if devices have similar specifications. 50/50 nic salts work across all MTL pod systems and pens. High VG freebase works across all sub-ohm tanks. But you cannot use MTL liquid in sub-ohm or vice versa—completely different requirements demand different liquid types.
Vape pen strength depends on type: MTL pens with 50/50 liquids use 10-20mg nic salts (20mg for heavy smokers, 10mg for moderate). Sub-ohm pens use 3-6mg freebase (6mg for some satisfaction, 3mg for clouds). Never use high nicotine in high-power devices.
Burnt taste from liquid mismatch: high VG in MTL device (too thick to wick), wrong wattage for liquid viscosity, sweet liquids in any device (degrades coils faster), or expired/damaged e-liquid. Ensure VG/PG ratio matches device specifications—most burnt issues stem from compatibility problems.
Technically yes, mixing creates intermediate ratio (50/50 + 70/30 ≈ 60/40), but safer to buy appropriate ratio. Mixed liquids may not perform optimally in either device type. Better practice: keep separate liquids for different devices rather than compromising with mixed ratios.
Most pod systems use 50/50 nic salts, but some RDL pods (0.4-0.6Ω) work with 60/40 or 70/30. Check your specific pod resistance: higher resistance (0.8Ω+) = 50/50, lower resistance (0.4-0.6Ω) = 60/40 or 70/30. Device manual specifies optimal liquid for your pods.
Wrong strength causes: too high = harsh throat hit, dizziness, nausea, headaches, nicotine poisoning symptoms. Too low = insufficient satisfaction, constant vaping, cravings, return to smoking. Match strength to smoking history: heavy smokers need 20mg, light smokers 10mg, sub-ohm users 3-6mg.
CBD e-liquids formulated for vaping work in appropriate devices (check VG/PG ratio compatibility). THC vaping is illegal in UK. Never use: cannabis oils, CBD tinctures, or products not designed for vaping—they contain ingredients causing serious lung damage. Only use vaping-specific CBD products if legal in your jurisdiction.
Simple selection process: 1) Check coil resistance (device manual or printed on coil), 2) Above 0.8Ω = buy 50/50 nic salts, 3) Below 0.8Ω = buy 70/30+ freebase, 4) Match nicotine to smoking history, 5) Choose preferred flavor. When uncertain, ask at purchase—experts guide proper selection.
Buy compatible e-liquids at WizVape with expert guidance: 50/50 nic salts (Bar Juice 5000, ElfLiq, MaryLiq) for MTL devices, 70/30 shortfills for sub-ohm, multi-buy deals (10 for £16), device-specific recommendations, comprehensive flavor selection, and fast UK delivery ensuring perfect compatibility for optimal vaping experience.
