Your Cart

Skip to content
The Most Up-To-Date Guide To Vape Tanks

The Most Up-To-Date Guide To Vape Tanks

Vape tanks are an important aspect of the vaping experience since they provide an outlet for heating e-liquid and producing vapour. Vape tanks are available in a variety of shapes and sizes to meet a variety of vaping requirements. It is necessary to understand vape tanks in order to use and maintain them effectively.

If you are absolutely new to e-cigarettes, you may want to start by reading the most up-to-date guide to vape tanks or browsing our selection of vape tanks to get a feel for the subject.

What Is Vape Tanks?

Vape tanks are typically used with vape mods, but they are also compatible with pen-style vaping devices that are 1 Ohm or higher in resistance. Vape tanks serve an important function in that they hold both your favorite e-liquids and the coil of your device.

In essence, your vape tank is where all the magic of inhaling tasty vapour takes place! They allow the e-liquid to sink into the wick, which then contacts the coil. When a user activates their device by pressing a firing button or inhaling, the coil heats up and converts the vape juice in the wick into delightful vapour.

Vape tanks can be found on top of your device's battery, which is the pen-like piece on older models or the bigger, box-shaped section on more modern models. Vape tanks come in a variety of forms, sizes, and colors, but they all serve the same basic function of holding your e-liquids and coil.

 Various Parts Of A Vape Tank

The base, coil, glass tank, top cap, and drip tip are the most key parts found in most vape tanks. Each part serves a specific purpose in the proper operation of your tank and the overall performance of your vaping device.

  1. Drip Tip (Mouthpiece)

The drip tip, which helps you to inhale vapour, is the first part of your vape tank. Drip tips on most vape tanks are easily replaceable, allowing them to be cleaned and replaced. Drip tips come in three sizes: 8.5mm standard 510, 10.5mm 710, and 12.5mm wide bore 810.

  1. Top Cap

The top cap shuts off your vape tank and houses the filling port. Threaded caps that can be easily pushed off, rotating caps that stay attached to the tank, and ring style caps that pop off with a port on the side are all options.

  1. O-Ring

O-rings are silicone or rubber parts that are utilized to keep your delicious e-liquid from leaking between the other sections of your tank. O-rings will need to be replaced once you see more leaking since they will gradually loosen. You'll also find O-rings on the coils to ensure a tight fit.

  1. Coil

The coil, which is made of cotton and a metal wire, converts your e-liquids into the mouthwatering vapour that we all really like. When a vaper turns on their device, the cotton absorbs the e-liquid and wicks it to the coil, where it may be vaporized.

  1. Glass Tank

The glass tank protects your coil and your e-liquid by covering it and holding it in place. This area allows you to view how much e-liquid is left in your tank as well as the status of it.

  1. Base

Your coil is set on contact points within the base. A 510 connection, a universal threading that allows your tank to connect to your mod, will be located on the outside of your tank's base.

Functions Of Vape Tanks

A vape tank has a vape coil, which is important for heating the liquid you've added to the tank. A coil is a piece of wrapped metal that turns the electricity of your vape device's battery into heat. An absorbent wick, often composed of cotton, wraps around this coil and soaks up the liquid housed in the tank. The two parts function together, with the wick providing a steady flow of liquid for the coil to heat.

  • Drip Tip: Act as the mouthpiece, allowing you to inhale the vapour produced by your kit.
  • Wick: Soaks up e-liquid held in the tank, giving the coil a steady supply to heat.
  • Coil Wire: Coil Wire heats up e-liquid by using power from the battery.
  • 510 Connections: Acting as a connection for power to travel from the battery to your tank.
  • Activation Button: Pressing the button on your device completes a circuit allowing the battery to create power for vaping.
  • USB: Charging point for the device.
  • Battery: Action as the power source of vape your vape kit, the battery is rechargeable via USB connection.

A funnel sits atop the coil and runs the length of the tank to the mouthpiece, allowing you to suck in the vapour produced by the coil when you inhale. On the bottom of the tank, you'll typically discover an airflow slot; this slot allows you to intake both air and vapour for a more comfortable inhale.

What Is The Relationship Between Vape Devices And Tanks?

A vape tank cannot function without the usage of a vape device; often, the two can be purchased together as a vape kit. These are highly recommended because they eliminate much of the guesswork involved in matching your tank to your device.

A vape device will have a battery and a controlling chipset. The battery will provide the necessary power to heat the coil in your vape tank, while the chipset will control and regulate the device's output. A variety of models have been developed based on this simple idea to meet the needs of an expanding market.

Various Types Of Tanks

Vape Tanks From Mouth To Lung And Direct To Lung

Vape tanks, like coils, are divided into two categories: mouth to lung and direct to lung. Both of these terms allude to the vaping style that the tank will support. A mouth to lung tank allows you to suck vapour into your mouth and then breathe it into your lungs (much like a cigarette); however, these tanks emit a lower amount of vapour in order to achieve this. Direct to lung creates significantly more vapour, allowing for a vaping method in which you inhale the vapour straight into your lungs before exhaling.

Sub Ohm Vape Tanks

Essentially, these are similar to direct-to-lung vape tanks. A sub ohm vape tank uses a coil with a resistance of less than 1.0 Ohm, resulting in higher volumes of vapour and suitability for direct to lung vaping. Don't be fooled if you see a sub ohm tank labeled as a direct to lung vape tank and vice versa.

Rebuildable Atomisers

Rebuildable atomisers are the ultimate of bespoke vaping and are only advised for skilled vapers. You can build and put your own coils in these tanks; you can choose the metal type, resistance, and size of your coils. The end result is a tank that does precisely what you want it to, but you'll need a strong understanding of vaping, Ohm's law, and battery safety to utilize it safely and effectively.

We hope this article was helpful, we try to write the The Most Up-To-Date Guide To Vape Tanks and if you have any questions about vape tanks or vaping in general, please do not hesitate to contact us.

Previous article Guide For Using A Clearomizer
Next article How To Stop And Fix Leaks (Tips That Are Simple But Effective)

Leave a comment

* Required fields